Accessories

Scale, P/N 100190

Low Profile
48" x 48" Platform
5,000 lb Capacity

Ramp Scale Access, P/N 100191

Drum Dollie, P/N 100249
Drum Dollie w/Absorbent Collar, P/N 100250 (pictured)

Drip catching drum dollie is designed to be used with an absorbent sock. Oversized dollie base helps keep drips contained. Handles drums up to 28 inches in diameter.

Standard heavy-duty dumpers for applications not requiring custom sizes or features. Lift and dump a variety of 24 inch diameter drums. Perfect for use with 55 gallon drums. Designed for easy one-person operation. A one-horsepower 110VAC motor powers the chute up with gravity controlled downward motion. Adjustable hold-downs secure container in place during use. Available in stationary or portable.

Specifications
Dump Height: 60 Inch
Chute Height: 72.5 Inch
Clearance (Overhead): 129 Inch
Clearance (Horizontal): 76 Inch
Chute Reach: 7 Inch
Frame Length: 53 Inch
Frame Width: 36 Inch
Weight (Stationary): 720 Lbs
Weight (Portable): 809 Lbs

Tilt Truck, P/N 100239

3-Wheel Dual Tapered Tilt Trucks roll on two axle-mounted wheels with ball bearings and one swivel caster with roller bearings. Truck is constructed of 14-gauge steel with leak proof solid welded seams. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading.

Specifications
Dimensions: 39H” x 48L” x 24W”
Capacity: 0.3 Cubic Yards / 1,000 Lbs

Tilt Truck, P/N 100240

3-Wheel Dual Tapered Tilt Trucks roll on two axle-mounted wheels with ball bearings and one swivel caster with roller bearings. Truck is constructed of 14-gauge steel with leak proof solid welded seams. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading.

Specifications
Dimensions: 39H” x 68L” x 24W”
Capacity: 0.4 Cubic Yards / 1,500 lbs

Tilt Truck, P/N 100241

4-Wheel Dual Tapered Tilt Trucks roll on two fixed casters reinforced steel tubing, and two swivel steering casters. Truck is constructed of 14-gauge steel with leak proof solid welded seams. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading.

Use to transfer cutting fluid from Chipmunk cutting fluid containment tray to storage container or filtration system. Powered by an energy efficient, non-oil, permanent split capacitor (PSC) motor in a stainless steel casing. Powerful 115VAC 60Hz motor is equipped with permanently lubricated ball bearings and thermal overload protection for long service life. Pump incorporates a lever for manual or automatic operation, screened bottom inlet, 1-1/4 inch discharge with 1-1/2 inch adapter included.

Note: For use with non-flammable liquids.